• kenburns1

    Energy Savings, Improved Comfort

    SOLUTIONS

  • kenburns1

    Long-term Fire Retardant

    PROTECTION

  • kenburns1

    Professional Installation

    Quality Assurance

  • kenburns1

    New Construction or Existing Homes

    Increase the value of your home

Attic Insulation - Cellulose Fibre Insulation

Procell Green™ Cellulose Insulation (R12 - R60) Superior Thermal, Acoustical & Fire Performance

Procell Green™ Cellulose Insulation is a contractor grade type 1 cellulose insulation for ease of installation in attics, walls, ceilings and floors.

It's not only a natural choice for the environmentally-conscious consumer but one that outperforms both thermally and acoustically. With a superior R-value of 3.8 per inch, ProCell Green’s excellent coverage, perfect fit and greater density is a sound alternative to other fibrous insulations.

ProCell Green insulation delivers long-term fire retardant protection and unlike other insulation products, will not melt or propagate fire. Safe and easy to install, it does not itch or contain any formaldehyde or harmful emissions.
It is specially treated to repel insects and rodents and will not promote the growth of harmful mold and fungi.

With over 87% recycled content, and many performance benefits, ProCell Green is a natural choice for all your insulation needs. Start saving today, save on product cost and get immediate rewards in energy savings.

Procell Green™ can be used in new or existing buildings and can be applied to any open horizontal or sloped surface with a pitch up to 4.5 in 12, as well as any enclosed space such as walls, floors, flat roofs and cathedral ceilings.

Whether your project is a residential, commercial, recreational, industrial or agricultural building, Kingston's Insulating Solutions has an effective solution to your insulating needs.

Attics are the quickest and easiest way to save energy and improve the comfort of your home. Our products can be blown over most pre-existing insulation such as fibreglass or rock wool loose-fill or batt insulation (to ensure you are not re-insulating over insulation with known or suspected health risks, such as asbestos or vermiculite, it is recommended you consult with a building or insulation specialist).

Thermal Properties - A look at R-values

The recommended values vary tremendously based on national, provincial or municipal building codes.

R values and their metric equivalent, RSI values, are a way of labelling the effectiveness of insulating materials. The higher the R value or RSI value, the more resistance the material has to the movement of heat. Insulation products sold in Canada are labelled with R and RSI values. Provincial building codes specify minimum R (or RSI) values for new construction, with different values for different applications. It is important to know what your local building code requires when planning new construction.

The right insulation system can save you money, reduce the amount of energy you use and make your home more comfortable.

R-value is a measure of resistance to heat flow through a given thickness of material. In theory, the higher the R-value, the greater that resistance. That’s fine as far as it goes.

Unfortunately, R-Value has taken hold in the consumer’s mind as a universal method for comparing insulations – the higher the R-Value, the better the insulation, end of story. But all R-Values are not created equal, because they measure only one of the factors that determine how insulation will perform in the real world.

Insulation is, first and foremost, meant to stop the movement of heat. The problem with using R-Value as the sole yardstick of an insulation’s effectiveness is that heat moves in and out of your home or commercial building in four ways: by conduction (which R-Value measures), and by convection, radiation and air infiltration (none of which R-Value measures).

The R-Values of insulation materials are measured in a lab. That would work great – if the home were inside a lab! But homes are built outdoors, and that means there are other factors like wind, humidity, and temperature changes in play. These factors create pressure differences between the interior and the exterior of the building due to things like hot air rising, wind, and mechanical systems forcing air through every tiny little opening and making its way to the interior or exterior, or to unconditioned areas of the building like attics, basements and crawl spaces.

The home or commercial building may look solid, but there are thousands of tiny gaps, cracks and penetrations between building materials. For example, if you apply the air pressure of a 20 MPH wind on a 20 deg. F day to a building, the typical R-19, fiberglass insulated wall often performs no better than the wood studs (R-6) because of air infiltration, with heat being transported around (bypassing) the fiberglass batts through convection. In very low density materials like loose blown fiberglass, heat will actually radiate right through the insulation, and this, along with convection, significantly reduces fiberglass’ installed performance and your comfort.

A superior insulation system will have good R-Value (prevent heat loss via conduction), will be pneumatically or spray applied, fully filling the building cavity (prevent heat loss via convection), and will be densely packed (prevent heat loss via air infiltration and radiation). Fiberglass meets the first criteria, but not the other three. Cellulose meets all four of these critical performance criteria!

R for R … cellulose outperforms – For a given R-value, loose cellulose weighs roughly three times as much per square foot as loose fiberglass.

Attic Insulation Photo Gallery
Attic Insulation Video

Attic Insulation - Blown-In or Loose-Fill Attic InsulationA typical day at work with Manny and his sons (Andrew and...

Posted by Kingston's Insulating Solutions on Thursday, October 1, 2015

Why Us - Advantages

  • Prompt Response
  • Friendly Customer Service
  • Comprehensive Demonstrations
  • Sensible Pricing
  • Green Products
  • Energy Savings
  • Damage Control
  • Quality Service